Changes to Step #8
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 7] Take the ''rambo_base_lower_mount'' and insert an M3x10 scew with a washer in the smallest hole. |
|---|---|
| + | [* 3] From the other side, screw an M3 hex nut until it is fully inserted. |
| + | [* 5] Remove the screw and washer |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added