Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Electronic cover base installation |
|---|---|
| [* 8] Take the ''rambo_base_upper_mount''. | |
| [* 5] Insert an M3 hex nut using the same technique as with the ''rambo_base_lower_mount''. | |
| [* 3] Insert 1x M5x8 screw in the rambo_base_upper_mount. | |
| [* 7] Engage 1x t-nuts on the M5 screw (1-2 turns) and place it vertically. |