Changes to Step #13
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 5] Slide the ''rambo_base_upper_mount'' from the top of the Z axis. |
|---|---|
| + | [* 8] Align the ''rambo_base_upper_mount'' on the electronic cover and fully tighten the bottom M3x14 from the inside of the cover. |
| + | [* 7] Fully tighten the M5x8 screw. |
Image 1
No previous image
Added
Image 2
No previous image
Added