Changes to Step #13
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Electronic cover base installation |
|---|---|
| [* 5] Slide the ''rambo_base_upper_mount'' from the top of the Z axis. | |
| [* 8] Align the ''rambo_base_upper_mount'' on the electronic cover and fully tighten the top M3x14 from the inside of the cover. | |
| [* 7] Tighten the M5x8 screw fully. |