Changes to Step #14
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 10] Pictures needs to be redo with correct Z motors |
|---|---|
| + | [* 5] Create a twisted loop with the LCD cables under the frame as shown in the image. |
| + | [* 7] Clip the LCD cables in the ''cable_clip_lcd''. |
| + | [* 8] Place the Z stepper cable on top of the ''cable_clip_vertical''. |
| + | [* 4] Attach LCD cables and Z motor cable to the ''cable_clip_vertical'' using a zip tie. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added