Changes to Step #14

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[* 10] Pictures needs to be redo with correct Z motors
-[* 5] Create a twisted loop with the LCD cables under the frame as shown in the image.
+[* 5] Create a twisted loop with the LCD cables under the front of the frame.
[* 7] Clip the LCD cables in the ''cable_clip_lcd''.
-[* 8] Place the Z stepper cable on top of the ''cable_clip_vertical''.
+[* 8] Place the Z stepper cable on the ''cable_clip_vertical''.
[* 4] Attach LCD cables and Z motor cable to the ''cable_clip_vertical'' using a zip tie.