Changes to Step #14

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] LCD and left Z motor wiring
[* 5] Create a twisted loop with the LCD cables under the front of the frame. Don't pinch the cables!
-[* 7] Clip the LCD cables in the ''cable_clip_lcd''.
-[* 8] Place the Z stepper cable on the ''cable_clip_vertical''.
-[* 4] Attach LCD cables and Z motor cable to the ''cable_clip_vertical'' using a zip tie.
+[* 7] Clip the LCD cables into the ''cable_clip_lcd''.
+[* 8] Insert a zip tie and place the left Z motor cable over the ''cable_clip_vertical''.
+[* 4] Attach the LCD cables and Z motor cable to the ''cable_clip_vertical'' using the zip tie. Take care not to over-tighten the zip tie and pinch the LCD cables.