Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 10] Pictures need to be redo with correct Z motors |
|---|---|
| + | [* 7] Attach the other Z stepper wire to the zip tie as shown in this picture. |
| + | [* 4] Plug Y axis motor on the RAMBo Mini/Einsy. |
| + | [* 8] Plug the two Z motors on the RAMBo Mini/Einsy. |
| + | [* 9] Verify the connections are correctly plugged. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added