Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [* 10] Pictures need to be redo with correct Z motors | |
| [* 7] Attach the other Z stepper wire to the zip tie as shown in this picture. | |
| [* 4] Plug Y axis motor on the RAMBo Mini/Einsy. | |
| - | [* 8] Plug the two Z motors on the RAMBo Mini/Einsy. |
| + | [* 8] Plug the ***two*** Z motors on the RAMBo Mini/Einsy. |
| [* 9] Verify the connections are correctly plugged. |