Changes to Step #26
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Wiring warnings - MK3(S) |
|---|---|
| [* 9] The next steps will not go in all details of the wiring. If you have any doubt or needs more details on how to proceed you can check the original Prusa assembly guides: | |
| [* 2] [https://help.prusa3d.com/en/guide/8-electronics-assembly-b3-r2-design_73648|MK3 (B3/R2 design)], early version of the electronic cover. | |
| [* 2] [https://help.prusa3d.com/en/guide/8-electronics-assembly-b7-r3-design_75136|MK3 (B7/R3 design)], the electronic cover has a removable part for the RPi Zero W | |
| [* 2] [https://help.prusa3d.com/en/guide/8-electronics-assembly_34416|MK3S] | |
| [* 9] Be extremely careful and take your time with the wiring. It could be a risk of damaging the printer or worse. |