Changes to Step #28
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 11] Direct links to the original Prusa assembly guides: [https://help.prusa3d.com/en/guide/8-electronics-assembly-b3-r2-design_73648|MK3 (B3/R2 design)], [https://help.prusa3d.com/en/guide/8-electronics-assembly-b7-r3-design_75136|MK3 (B7/R3 design)], [https://help.prusa3d.com/en/guide/8-electronics-assembly_34416|MK3S]. |
|---|---|
| + | [* 10] The images and some text in this step are copyright of [https://www.prusa3d.com|Prusa Research]. |
| + | [* 9] There are two versions of the PSU wires, make sure you identify where are the positive and the negative. This is extremely ***IMPORTANT*** or you might damage your RAMBo Einsy. |
| + | [* 5] Both wires on each pair are black, ***POSITIVE WIRE*** is marked with a ***RED LINE***. |
| + | [* 6] On each pair, there is a red and black wire. ***POSITIVE WIRE*** is ***ALMOST FULLY RED***. |
| + | [* 9] The connectors must be oriented in the correct way when you fix them. The ***2nd image*** shows the ***correct*** orientation. The 3rd image shows the wrong orientation. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added