Changes to Step #33
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 11] Direct links to the original Prusa assembly guides: [https://help.prusa3d.com/en/guide/8-electronics-assembly-b3-r2-design_73648|MK3 (B3/R2 design)], [https://help.prusa3d.com/en/guide/8-electronics-assembly-b7-r3-design_75136|MK3 (B7/R3 design)], [https://help.prusa3d.com/en/guide/8-electronics-assembly_34416|MK3S]. |
|---|---|
| + | [* 8] Attach the extruder textile sleeve (or spiral wrap) to the top of the electronic cover. |
| + | [* 10] This is image shows the design of the MK3 B7/R3 or MK3S electronic cover. The MK3 B3/R2 design is slightly different. |
| + | [* 6] Verify that the plug-aligner is still in place and correctly oriented. |
| + | [* 10] 2nd image copyright: [https://www.prusa3d.com|Prusa Research] |
Image 1
No previous image
Added
Image 2
No previous image
Added