Changes to Step #39
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Electronic cover door installation |
|---|---|
| [* 5] Slide the ''rambo_hinge_lower'' down to the joining plate and tighten the M5 screw fully. | |
| [* 7] Place the electronic cover door on the ''rambo_hinge_lower''. | |
| [* 8] Install the ''rambo_hinge_upper'' with an M5x8 and a t-nut using the same technique as in the previous step. Tighten the screw fully. | |
| [* 9] Make sure you can still open and close the door. |