Changes to Step #39

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Electronic cover door installation
[* 5] Slide the ''rambo_hinge_lower'' down to the joining plate and tighten the M5 screw fully.
-[* 7] Place the electronic cover door on the ''rambo_hinge_lower''.
+[* 7] Place the electronics cover door on the ''rambo_hinge_lower''.
[* 8] Install the ''rambo_hinge_upper'' with an M5x8 and a t-nut using the same technique as in the previous step. Tighten the screw fully.
[* 9] Make sure you can still open and close the door.