Changes to Step #40
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Electronic cover door installation |
|---|---|
| [* 5] Secure the electronic cover door with an M3x40 screw (reused from your original Prusa). | |
| [* 11] Tech tip: when you need to access the electronic, it is helpful to remove completely the door. On the Bear frame it is very easy: | |
| [* 7] Unscrew partially the ''rambo_hinge_upper'', move it higher up and tighten it back. | |
| [* 8] Unscrew the M3x40 screw (green circle of 1st image). You can now remove the door completely and have better access to the electronic. |