Changes to Step #1
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] X carriage preparation |
|---|---|
| + | [* 3] Insert four M3 square nuts on the ''x_carriage_back'' |
| + | [* 10] Tweezers are handy to insert those square nuts. |
| + | [* 10] If you have trouble to insert top left square nuts, you could unscrew the M3x40mm screw just above. Be careful to not losing the two nylon washers and don't forget to screw it back in place! |
Image 1
No previous image
Added