Changes to Step #1

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] X carriage preparation
[* 3] Insert four M3 square nuts on the ''x_carriage_back''
[* 10] Tweezers are handy to insert those square nuts.
-[* 10] If you have trouble to insert top left square nuts, you could unscrew the M3x40mm screw just above. Be careful to not losing the two nylon washers and don't forget to screw it back in place!
+[* 10] If you have trouble inserting the top left square nut, slowly unscrew the M3x40mm screw just above. Be careful not to lose the two nylon washers and don't forget to screw it back in place!