Changes to Step #7

Edit by Matthew Harrison —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] X carriage back bottom and cables
-[* 2] Constitute a center strand with the following cables: E motor, hotend fan, Pinda, nozzle fan. Organize the strand as shown in the first image
-[* 5] Slide from top the bottom of ''x_carriage_back'' with the cable strand in the middle.
+[* 2] Create a bundle with the following cables: extruder motor, hotend fan, Pinda, and nozzle fan. Route the bundle as shown in the first image
+[* 5] Slide down the ''x_carriage_back'' with the cable bundle in the middle.
[* 6] Secure the ''x_carriage_back'' bottom with one M3x18 screw
[* 4] And two M3x10