Changes to Step #9
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] Extruder |
|---|---|
| + | [title] Extruder cables |
| [* 10] Those instructions are made for spiral wrap but can be applied to textile sleeve without an issue. | |
| [* 6] Using two zip ties, attach the hotend cables. | |
| [* 5] Insert the 3 mm nylon filament into the end of the ''cable_guide_back''. | |
| [* 9] The nylon filament should slide in at least 10 mm. If you have trouble inserting it, the nylon filament end may be tapered. by a diagonal cut. |