Changes to Step #9

Edit by Matthew Harrison —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Extruder cables
-[* 10] Those instructions are made for spiral wrap but can be applied to textile sleeve without an issue.
+[* 10] These instructions are made for spiral wrap, but can be applied to textile sleeve without an issue.
[* 6] Using two zip ties, attach the hotend cables.
[* 5] Insert the 3 mm nylon filament into the end of the ''cable_guide_back''.
[* 9] The nylon filament should slide in at least 10 mm. If you have trouble inserting it, the nylon filament end may be tapered. by a diagonal cut.