Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 4] Wrap the wires coming out of the ''x_carriage_back'' using spiral wrap for 2-3 turns. The wrap should touch the ''x_carriage_back''. |
|---|---|
| + | [* 6] Continue spiral wrapping the cable now including the nylon filament and hotend cables. |
| + | [* 5] Secure the spiral wrap to the ''cable_guide_back'' using three zip ties. |
| + | [* 9] Verify that no cable has been pinched. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added