Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Extruder cables |
|---|---|
| [* 4] Wrap the wires coming out of the ''x_carriage_back'' using spiral wrap for 2-3 turns. The wrap should touch the ''x_carriage_back''. | |
| [* 6] Continue spiral wrapping the cable now including the nylon filament and hotend cables. | |
| [* 5] Secure the spiral wrap to the ''cable_guide_back'' using three zip ties. | |
| [* 9] Verify that no cable has been pinched. |