Changes to Step #9

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Case Mounting I
-[* 5] Insert a ***M5x8mm*** screw into the pocket on the top of the case. We will use this screw to secure the case to the Z extrusion on the frame.
-[* 3] ***Loosely*** thread a ***t-nut*** onto the screw from the outside of the case. Do not tighten the T-nut to the case, as we will slide the T-nut into the Z extrusion on the frame.
+[* 5] Insert a ''M5x8mm'' screw into the pocket on the top of the case.
+[* 3] ***Loosely*** thread a t-nut onto the screw from the outside of the case. Do not tighten the T-nut to the case, as we will slide the T-nut into the Z extrusion on the frame.