Changes to Step #11
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Case Mounting III | |
| - | [* 5] Insert a ***M5x8mm*** screw in the pocket where the case sits on the back extrusion of the XY frame. |
| - | [* 5] Insert a ***t-nut*** in the top slot of the extrusion and attach it to the screw we have just inserted. Do not tighten the screw yet. |
| - | [* 8] Tighten both screws to the frame with the help of the t-nuts. |
| + | [* 5] Insert a t-nut and M5x8mm screw in the on the back extrusion as shown in the picture. |
| + | [* 8] ***Alternatively*** tighten both screws to the frame with the help of the t-nuts. |
| [* 9] Tighten the case parallel to the Z extrusion. |