Changes to Step #7

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] WiFi vs Ethernet
[* 1] ***WiFi Only:*** If you have the WiFi version of the Duet 3 Mini 5+ you will not need to connect an Ethernet cable.
- [* 5] You can cover the cut-out for the ethernet connector with ''board_rj45_cap''.
+ [* 5] Cover the cut-out for the ethernet connector with ''board_rj45_cap''.
[* 1] ***Ethernet Only:*** If you have the Ethernet version of the Duet 3 Mini 5+ you will need access to its Ethernet port.
[* 8] Leave the ''board_rj45_cap'' off the case as the cut-out will allow you to attach an ethernet wire to the board.