Changes to this Step
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Selftest and PID calibration |
|---|---|
| + | [* 1] Turn on the printer. |
| + | [* 5] Run the self test in calibration settings. |
| + | [* 9] If selftest ends with error, correct them before going further. |
| + | [* 6] In Settings -> Temperature -> Fan speed set a value at 130 if you print lots of PETG and 255 if you print lots os PLA. For other material select according to your most used filament. |
| + | [* 7] Run PID calibration in calibration settings. |
| + | [* 7] Choose a temperature that match your most used printing temperature. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added