Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Measure and get calibration cube | |
| [* 1] Measure your filament diameter with a micrometer. Write it on a piece of paper. | |
| [* 11] You could measure the filament at several places and calculate the average. | |
| - | [* 1] Download the calibration |
| + | [* 1] Download the calibration model here : [https://www.thingiverse.com/thing:3405991|thingiverse.com/thing:3405991] |