Changes to Step #3

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Measure and get calibration cube
[* 1] Measure your filament diameter with a micrometer. Write it on a piece of paper.
-[* 11] You could measure the filament at several places and calculate the average.
+ [* 10] You could un-spool a little the filament, measure at several places and calculate the average.
[* 1] Download the calibration model from [https://www.thingiverse.com/thing:3405991|thingiverse.com/thing:3405991] or from [https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/test/cube|github.com/gregsaun/.../test/cube]