Editing community optional parts

[title|Community's Optional Parts] [summary]Here is a list of optional parts made by the Bear community[/summary] [summary_image|1233] Here is a selection of interesting optional parts made by the Bear community. Massive thank you for all this awesome work! Disclaimer: Those optional parts are here for reference, we have not necessarily tested them and we cannot be taken responsible for damage of your printer. We invite you to write to the author of those parts in case you have questions. == For Bear Upgrade Frame == ===== Spool holder ===== {table |! Description |! Author |! Link |-- | Spool holder | Christopher Burgess | https://www.thingiverse.com/thing:2846383 |-- | Spool holder | Martin Majewski | https://www.thingiverse.com/thing:3142106 |-- | Spool holder | Jer Lo | https://www.thingiverse.com/thing:3755501 |-- | Spool holder | BladeRunner 3D | https://www.prusaprinters.org/prints/34631-prusa-bear-spool-holder-and-filament-guide-set |-- | Snap On Spool Holder | Takrel | https://www.printables.com/model/246481-snap-on-spool-holder-for-the-full-bear-frame } ===== Electronic cover ===== For Einsy, Duet, Raspberry PI, PSU, etc. {table |! Description |! Author |! Link |-- | Improved Einsy enclosure with removable door | herr_brain | https://www.printables.com/model/239714-improved-einsy-enclosure |-- | Universal Einsy Box | Juan Puchol | https://www.thingiverse.com/thing:3901001 |-- | Hexagonal Einsy Case | Amelia Marie Collins | https://www.prusaprinters.org/prints/127704-hexagonal-einsy-case-for-bear-upgrade |-- | Ocie's Duet Wifi Enclosure Box remix | George Harrison | https://www.thingiverse.com/thing:3642653 |-- | Raspberry Pi 3B case | Kevin Velickovic | https://www.thingiverse.com/thing:3878461 |-- | Mean Well LRS-350 PSU Case | Matthew Humphrey | https://www.thingiverse.com/thing:3180564 } ===== Motion and axis ===== {table |! Description |! Author |! Link |-- | Bear and Bear Z axis for 10mm smooth rods | Shaun Doe | https://www.prusaprinters.org/prints/51158-bear-bearexxa-10mm-z-axis } ===== Lighting ===== {table |! Description |! Author |! Link |-- | LED Light Mounts | Joe Mike Terranella | https://www.thingiverse.com/thing:3619763 |-- | Stylish Lights | Amelia Marie Collins | https://www.printables.com/model/129980-lights-for-the-prusa-i3-bear-upgrade-frame } ===== Other ===== {table |! Description |! Author |! Link |-- | SD-Card Holder V-Slot Extrusion | D. Meyer | https://www.thingiverse.com/thing:3198211 |-- | Revo Nozzle Holder | Paul_GD | https://github.com/PaulGameDev/prusa_i3_bear_upgrade/blob/dev/optional_parts/revo_nozzle_holder/README.md |-- | Anti-Vibration Feet HULA | thrutheframe | https://www.printables.com/model/873633-hula-for-prusa-mk34-prusa-bear |-- | Bear Card Frame | Takrel | https://www.printables.com/model/246478-bear-card-frame } == For Bear Extruder and X Axis == Up to version 1.x ===== Motor and gearing ===== {table |! Description |! Author |! Link |-- | Gearbox Pulleybox 3.5:1 | vertigo235 | https://www.thingiverse.com/thing:3714978 |-- | Gearbox Pulleybox BowTieBelt | Shaun Doe | https://www.prusaprinters.org/prints/61260-bowtiebelt-31-nema17-extruder-gearbox-pulleybox |-- | Sherpa Mini for BearExxa | Alex | https://www.prusaprinters.org/prints/90921-sherpa-mini-for-bearexxa } ===== Multi-color ===== {table |! Description |! Author |! Link |-- | Bear Extruder for MMU2S | vertigo235 | https://www.thingiverse.com/thing:3472911 |-- | Filament sensor cover for Palette 2 | CheshirePirat | https://www.thingiverse.com/thing:3803392 |-- | MMU2S Bear Extruder idler mod | Steve Heller | https://www.thingiverse.com/thing:4193486 } ===== Motion and axis ===== {table |! Description |! Author |! Link |-- | X end modification for couplers | Maker Melissa's Lab | https://www.youtube.com/watch?v=N1Hm1EWMIEo |-- | Long bearing support for X carriage | Shaun | https://www.prusaprinters.org/prints/49261-bearexxa-mk3s-lm8luu-x-axis |-- | Long bearing support for X ends | Shaun Doe | https://www.prusaprinters.org/prints/51010-bearexxa-mk3s-lm8luu-z-axis |-- | Bear and Bear X axis for 10mm smooth rods | Shaun Doe | https://www.prusaprinters.org/prints/51158-bear-bearexxa-10mm-z-axis |-- | Printable leadscrew nut | TrevJonez | https://www.thingiverse.com/thing:4323968 |-- | Leadscrew nut drill template | ChipCE | https://www.thingiverse.com/thing:4401155 |-- | X Carriage for Stock Prusa Extruder | Timosch_28 | https://www.thingiverse.com/thing:4889439 } ===== Hotends ===== {table |! Description |! Author |! Link |-- | Volcano adapter for BearExxa | flobler | https://www.thingiverse.com/thing:4438667 |-- | E3D Volcano Cover for Bear Extruder | Tyler Townes | https://www.thingiverse.com/thing:3988922 |-- | Bear extruder for Slice Mosquito Hotend | H20Slicer | https://www.thingiverse.com/thing:4748114 |-- | E3D V6 PTFE Length Cutter Thing | vertigo235 | https://www.printables.com/model/22027-e3d-v6-ptfe-length-cutter-thing |-- | Bear Fan Duct for the EBM Papst RLF35 | brokenminded | https://www.printables.com/de/model/78048-bear-fan-duct-for-the-ebm-papst-rlf35 } ===== Bed leveling ===== {table |! Description |! Author |! Link |-- | Bear Extruder BLTouch Mount | vertigo235 | https://www.thingiverse.com/thing:3251530 }