Here is a selection of interesting optional parts made by the Bear community. Massive thank you for all this awesome work!
Disclaimer: Those optional parts are here for reference, we have not necessarily tested them and we cannot be taken responsible for damage of your printer. We invite you to write to the author of those parts in case you have questions.
For Bear Upgrade Frame
Spool holder
| Description | Author | Link |
|---|---|---|
| Spool holder | Christopher Burgess | https://www.thingiverse.com/thing:284638... |
| Spool holder | Martin Majewski | https://www.thingiverse.com/thing:314210... |
| Spool holder | Jer Lo | https://www.thingiverse.com/thing:375550... |
| Spool holder | BladeRunner 3D | https://www.prusaprinters.org/prints/346... |
| Snap On Spool Holder | Takrel | https://www.printables.com/model/246481-... |
Electronic cover
For Einsy, Duet, Raspberry PI, PSU, etc.
| Description | Author | Link |
|---|---|---|
| Improved Einsy enclosure with removable door | herr_brain | https://www.printables.com/model/239714-... |
| Universal Einsy Box | Juan Puchol | https://www.thingiverse.com/thing:390100... |
| Hexagonal Einsy Case | Amelia Marie Collins | https://www.prusaprinters.org/prints/127... |
| Ocie's Duet Wifi Enclosure Box remix | George Harrison | https://www.thingiverse.com/thing:364265... |
| Raspberry Pi 3B case | Kevin Velickovic | https://www.thingiverse.com/thing:387846... |
| Mean Well LRS-350 PSU Case | Matthew Humphrey | https://www.thingiverse.com/thing:318056... |
Motion and axis
| Description | Author | Link |
|---|---|---|
| Bear and Bear Z axis for 10mm smooth rods | Shaun Doe | https://www.prusaprinters.org/prints/511... |
Lighting
| Description | Author | Link |
|---|---|---|
| LED Light Mounts | Joe Mike Terranella | https://www.thingiverse.com/thing:361976... |
| Stylish Lights | Amelia Marie Collins | https://www.printables.com/model/129980-... |
Other
| Description | Author | Link |
|---|---|---|
| SD-Card Holder V-Slot Extrusion | D. Meyer | https://www.thingiverse.com/thing:319821... |
| Revo Nozzle Holder | Paul_GD | https://github.com/PaulGameDev/prusa_i3_... |
| Silicone feet | Daniel Krah | https://thangs.com/danielkrah/Bear-21-ru... |
| Bear Card Frame | Takrel | https://www.printables.com/model/246478-... |
For Bear Extruder and X Axis
Up to version 1.x
Motor and gearing
| Description | Author | Link |
|---|---|---|
| Gearbox Pulleybox 3.5:1 | vertigo235 | https://www.thingiverse.com/thing:371497... |
| Gearbox Pulleybox BowTieBelt | Shaun Doe | https://www.prusaprinters.org/prints/612... |
| Sherpa Mini for BearExxa | Alex | https://www.prusaprinters.org/prints/909... |
Multi-color
| Description | Author | Link |
|---|---|---|
| Bear Extruder for MMU2S | vertigo235 | https://www.thingiverse.com/thing:347291... |
| Filament sensor cover for Palette 2 | CheshirePirat | https://www.thingiverse.com/thing:380339... |
| MMU2S Bear Extruder idler mod | Steve Heller | https://www.thingiverse.com/thing:419348... |
Motion and axis
| Description | Author | Link |
|---|---|---|
| X end modification for couplers | Maker Melissa's Lab | https://www.youtube.com/watch?v=N1Hm1EWM... |
| Long bearing support for X carriage | Shaun | https://www.prusaprinters.org/prints/492... |
| Long bearing support for X ends | Shaun Doe | https://www.prusaprinters.org/prints/510... |
| Bear and Bear X axis for 10mm smooth rods | Shaun Doe | https://www.prusaprinters.org/prints/511... |
| Printable leadscrew nut | TrevJonez | https://www.thingiverse.com/thing:432396... |
| Leadscrew nut drill template | ChipCE | https://www.thingiverse.com/thing:440115... |
| X Carriage for Stock Prusa Extruder | Timosch_28 | https://www.thingiverse.com/thing:488943... |
Hotends
| Description | Author | Link |
|---|---|---|
| Volcano adapter for BearExxa | flobler | https://www.thingiverse.com/thing:443866... |
| E3D Volcano Cover for Bear Extruder | Tyler Townes | https://www.thingiverse.com/thing:398892... |
| Bear extruder for Slice Mosquito Hotend | H20Slicer | https://www.thingiverse.com/thing:474811... |
| E3D V6 PTFE Length Cutter Thing | vertigo235 | https://www.printables.com/model/22027-e... |
| Bear Fan Duct for the EBM Papst RLF35 | brokenminded | https://www.printables.com/de/model/7804... |
Bed leveling
| Description | Author | Link |
|---|---|---|
| Bear Extruder BLTouch Mount | vertigo235 | https://www.thingiverse.com/thing:325153... |
One Comment
hai i am heemanth from india i have been using prusa bear for last 3 years and recently i tough of upgrading of my filament sensor from filament detector sensor to filament flow and runout sensor (like in this link www.youtube.com/watch?v=v2mQ4X1J3cs (DIY Filament Runout Encoder!)) by using the same sensor from before. i try to change the code in the firmware but i was not able to do it so i am asking you for help this will be use full for all the prusa bear community and if need i will also provide you with the cad design which i design for this you can contact me. thank you i will be waiting for your reply
Heemant. Y - Reply