Skip to main content

Site Navigation

Your Account

Choose Language


Revision to 95jghwzvw9l46s3g

Grégoire Saunier

* '''Warning :'''
** Follow the recommended print settings to ensure your parts have the correct tolerances, stiffness and print quality.
** You '''MUST calibrate your extrusion multiplier''' before printing for each and every spool you are going to use. If you don't do this you might have problem during the assembly. Check our guide on how to proceed: [guide|8]
== Printed Parts STL ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes