Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to 95jghwzvw9l46s3g

Grégoire Saunier

 
* https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/manual/print_settings.md
* '''Warning :WARNING'''
** Follow the recommended print settings to ensure your parts have the correct tolerances, stiffness and print quality'''print settings'''.
** You '''MUST calibrate'''Calibrate your extrusion multiplier''' before printing forfor''' each and every spoolspool''' you are going to use. If you don't do this you might have problem during the assembly. Check our guide on how to proceedcalibration guide: [guide|8]
* '''Warning :WARNING'''
** Follow the recommended print settings to ensure your parts have the correct tolerances, stiffness and print quality'''print settings'''.
** You '''MUST calibrate'''Calibrate your extrusion multiplier''' before printing forfor''' each and every spoolspool''' you are going to use. If you don't do this you might have problem during the assembly. Check our guide on how to proceedcalibration guide: [guide|8]
 
== Printed Parts STL ==
* MK2.5S : [https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/printed_parts/bear_extruder_x_axis_mk2.5s.zip?raw=true|Download]
* MK3S : [https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/printed_parts/bear_extruder_x_axis_mk3s.zip?raw=true|Download]
* '''WARNING'''
** Follow the recommended '''print settings'''.
** '''Calibrate your extrusion multiplier''' before printing for''' each and every spool''' you are going to use. Check our calibration guide: [guide|8]
 
== Compatibility ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes