Revision to 95jghwzvw9l46s3g
| * https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/manual/print_settings.md | |
| - | |
| - | === Warning === |
| - | |
| - | * Follow the recommended print settings to ensure your parts are stiff, correct tolerances and best print quality. |
| - | * You '''must calibrate your extrusion multiplier''' before printing for each and every spool you are going to use. Check our guide on how to proceed: [guide|8] |
| + | * '''Warning :''' |
| + | ** Follow the recommended print settings to ensure your parts are stiff, correct tolerances and best print quality. |
| + | ** You '''MUST calibrate your extrusion multiplier''' before printing for each and every spool you are going to use. Check our guide on how to proceed: [guide|8] |
| == Printed Parts STL == |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.