Revision to Frame
| [https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/dev/doc/print_settings.md|Read the print settings here]. | |
| - | |
| + | ***WARNING***: It is important to follow the recommended print settings and to ***calibrate your extrusion multiplier*** before printing the parts (for each and every spool that you use). Check our calibration guide: [guide|8] |
| == Compatibility == | |
| - | This Bear Frame Upgrade 2.1 is compatible with the |
| + | This Bear Frame Upgrade 2.1 is compatible with the ***Full Bear Frame Upgrade 2.0 MK3*** frame. If you do not know which frame you have please [[Bear FAQ#Section_Which_Full_Bear_frame_do_I_have|check our FAQ here]]. The 2.1 version needs extra hardware (screws, nuts, washers, dowel pin), check the [https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/dev/doc/bom.md|bill of materials] for more details. You can also order hardware upgrade kit from our [[Bear_FAQ#Section_Who_are_the_official_distributors_of_the_Bear_Upgrade|distributor websites]]. |
| If you have a Full Bear Frame Upgrade 2.0 MK2S or MK2.5 frame you can find compatible parts in the optional parts section below. |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.