Revision to Frame
| [summary]Guides for Bear Upgrade frame[/summary] | |
| + | |
| + | |
| + | |
| + | == Printed Parts STL == |
| + | |
| + | Bear Frame 2.1 for MK3(S) STL files: [https://github.com/gregsaun/prusa_i3_bear_upgrade/releases/latest/download/bear21_mk3-3s_stl.zip|bear21_mk3-3s_stl.zip] |
| + | |
| + | Bear Frame 2.1 for MK2(S) or MK2.5(S) STL files: [https://github.com/gregsaun/prusa_i3_bear_upgrade/releases/latest/download/bear21_mk2-2s-25-25s_stl.zip|bear21_mk2-2s-25-25s_stl.zip] |
| + | |
| + | Bear Frame 2.1 optional parts (check optional parts section below) files: [https://github.com/gregsaun/prusa_i3_bear_upgrade/releases/latest/download/bear21_optional_parts.zip|bear21_optional_parts.zip] |
| + | |
| + | == Print Settings == |
| + | |
| + | [https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/dev/doc/print_settings.md|Read the print settings here]. |
| + | |
| + | '''WARNING''': It is important to follow the recommended print settings and to '''calibrate your extrusion multiplier''' before printing the parts (for each and every spool that you use). Check our calibration guide: [guide|8] |
| + | |
| + | == Compatibility == |
| + | |
| + | This Bear Frame Upgrade 2.1 is compatible with the Full Bear Frame Upgrade 2.0 MK3 frame. If you do not know which frame you have please [[Bear FAQ#Section_Which_Full_Bear_frame_do_I_have|check our FAQ here]]. |
| + | |
| + |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.