Edit History for r63d85yfkvrohzf1


	* https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/optional_parts/bear_hemera/README.md#print-settings
-	* '''~~Warning :~~'''
-	** Follow the recommended print settings ~~to ensure your parts have the correct tolerances, stiffness and print quality~~.
-	** ~~You~~ '''~~MUST calibrate~~ your extrusion multiplier''' before printing for each and every spool you are going to use. ~~If you don't do this you might have problem during the assembly.~~ Check our guide ~~on how to proceed~~: [guide\|8]
+	* '''WARNING'''
+	** Follow the recommended '''print settings'''.
+	** '''Calibrate your extrusion multiplier''' before printing for''' each and every spool''' you are going to use. Check our calibration guide: [guide\|8].

	== Printed Parts STL ==

	* For MK2(S) MK2.5(S) : [https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/optional_parts/bear_hemera/printed_parts/bearmera_mk2_mk2s_mk2.5_mk2.5s.zip?raw=true\|Download]
	* For MK3(S) : [https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/optional_parts/bear_hemera/printed_parts/bearmera_mk3_mk3s.zip?raw=true\|Download]
+	* '''WARNING'''
+	** Follow the recommended '''print settings'''.
+	** '''Calibrate your extrusion multiplier''' before printing for''' each and every spool''' you are going to use. Check our calibration guide: [guide\|8].

	== Compatibility ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.