Editing Step 14 —
Assemble cable guide back

Step Type:

Drag to rearrange

Screw cable_guide_back_a and cable_guide_back_b to the x_carriage using an M3x40 screw

The M3x40 screw should be at a slight angle to the horizontal while you are tightening it.

The M3x40 screw should be at a slight angle to the horizontal while you are tightening it.

Add the textile sleeve as explained in the Prusa manual for MK3S (steps 62 to 64): https://manual.prusa3d.com/Guide/5.+E-ax...

Your contributions are licensed under the open source Creative Commons license.