Remove the M3x40 screw securing the Rambo/Einsy cover and disconnect all the cables.

Cut all zip ties that are used to attach cables to the frame.

Be careful not to cut the cables whilst cutting the zip ties.

Disassemble the extruder and remove it from the X axis. If you don't know how to proceed, we recommend that you follow the assembly guides in reverse.

Links to Prusa's assembly guides: mk3s, mk2.5s, mk3, mk2.5, mk2s

Links to Bear's extruder assembly guides: Bear extruders guides.

Links to Bondtech assembly guides: Bondtech extruders guides