Editing Step 1 —
LCD preparation

Step Type:

Drag to rearrange

Slide the lcd_support_a and lcd_support_b onto the LCD control board.

Verify that the orientation is correct.

Assemble the LCD cover on the LCD control board.

Adjust the position of the lcd_support_a and lcd_support_b in order to insert the LCD control board on the cover.

The LCD control board must clip into the LCD cover.

Secure the LCD control board with 2x M3x10 screws (reused from your Original Prusa).

Put the LCD knob back in place.

Your contributions are licensed under the open source Creative Commons license.