Editing Step 14 —
PSU installation - Black PSU

Step Type:

Drag to rearrange

Remove the PSU cover (with Prusa logo) by unscrewing the 2x M3x10 screws.

Take an extra M3x10 (reused from your Original Prusa) screw and secure the PSU to the psu_lower_mount. Do not tighten fully yet.

Verify that the PSU cables are not pinched and that they go out of the back of the PSU and pass under the Y axis smooth rod.

Verify that the PSU cables are not pinched and are routed correctly.

Your contributions are licensed under the open source Creative Commons license.