Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 12 —

Step Type:

Drag to rearrange

Insert two M3 hex nuts in the dedicated pockets of the x_end_idler.

Note the orientation of the trapezoidal nut.

Insert a trapezoidal nut in the top of the x_end_idler.

Use two M3x18 screws, to tighten the trapezoidal nut in place. Do not over-tighten the screws.

Verify the orientation of the trapezoidal nut.

Your contributions are licensed under the open source Creative Commons license.