Assembly Guide
Bill Of Materials
Print Settings
- https://github.com/gregsaun/bear_extrude...
- WARNING
- Follow the recommended print settings.
- Calibrate your extrusion multiplier before printing for each and every spool you are going to use. Check our calibration guide: Extrusion multiplier and filament diameter.
Printed Parts STL
WARNING :
- Follow the recommended print settings.
- Calibrate your extrusion multiplier before printing for each and every spool you are going to use. Check our calibration guide: Extrusion multiplier and filament diameter.
For E3D v6 hotend:
For Slice Engineering Mosquito hotend:
