Slide a M3 washer on a M3x40 screw.
Insert the screw in the top left hole of the x_carriage until it is just protruding from the other side of the extruder_body.
Add a M3 nylon washer on the end of the screw.
Add the extruder_idler in the opening. and push the screw.
Leave a space to insert the second M3 nylon washer.
Insert the second M3 nylon washer and push the screw further to secure it.
Slightly tighten the screw, ensuring that the extruder_idler can still rotate freely.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.