Editing Step 6 —
X carriage assembly

Step Type:

Drag to rearrange

Verify that the M3x25mm screws are snug

Slide a M3 square nut into the extruder_body.

Use a M3x10 screw to attach the extruder_body to the x_carriage.

Use a M3x40 screw with a M3 washer to attach the extruder_body to the x_carriage.

Verify that extruder_body and x_carriage are correctly aligned. Use the M3x10 and M3x40 screws to adjust, if necessary.

Your contributions are licensed under the open source Creative Commons license.