Turn the printer off and on.
Preheat the heated bed and extruder to PLA temperature through the Preheat menu of your printer.
Unplug the hotend thermistor wires:
Rambo Mini hotend thermistor connector (MK2, MK2S, MK2.5 and MK2.5S).
Rambo Einsy hotend thermistor connector (MK3 and MK3S).
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.