After around 2 minutes you should get the PREHEAT ERROR message displayed on the printer.
Set targeted temperatures back to 0°C via Preheat/Cooldown or Settings/Temperature menu.
Plug back the hotend heater and let the hotend cool down under 50°C.
Turn the printer off after hotend and heated bed are cooled down.
If this step behaves differently please verify your connection and firmware. If it continues stop using your printer and contact us or ask for help.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.