To test runaway protection (or MAXTEMP protection) you need to shortcut the thermistor pins on the Rambo board.
You will need a Female to Female Dupon cable to shortcut the thermistor connector.
Alternatively you can cut an old thermistor and connect both wires together (those that are connected on the connector side).
Here is an example on how to connect the Dupon cable for the next steps. Note the position is only for the example.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.