Step Type:

Drag to rearrange

Locate the marker of the Y carriage.

Flip the carriage to have the marker facing the table (not visible anymore in the 2nd and 3rd image).

The y_bearing_holders have 2 dots printed on one of their corners. Place the 3x y_bearing_holders with the dots oriented as shown on the 2nd image.

Double check the orientation of the y_bearing_holders, this is important as you might have issues later with the heated bed.

Secure the bearing holders with 6x M3x25 screws. Do NOT tighten them yet!

Your contributions are licensed under the open source Creative Commons license.