Editing Step 9 —
Prepare Y idler tensioner

Step Type:

Drag to rearrange

Prepare the following parts:

1x 20T idler with Y axis belt (650mm) looped around it.

1x y_idler_tensioner printed part.

1x dowel pin.

Place the belt around the idler and insert it into the y_idler_tensioner.

Insert the dowel pin from the right side. Make sure the dowel pin is fully inserted and does not stick out of the y_idler_tensioner

Keep the y_idler_tensioner for use later.

Your contributions are licensed under the open source Creative Commons license.