Step Type:

Drag to rearrange

Gently insert 2x Y axis smooth rods (330mm long).

You must not use any significant force whilst inserting the rods into the linear bearings.

Don't rotate the smooth rods, the LM8UU bearings are not made to rotate.

Loosen the M5 screws of the 2x right y_rod_holders. You should be able to slide them easily by hand.

Clip the Y smooth rods and carriage assembly into the y_rod_holders. The Single bearing should be to the right.

It is very important to have the LM8UU bearings correctly oriented or you will have issues later in the assembly.

Your contributions are licensed under the open source Creative Commons license.